home button Industrial Defense
×

SIZING GUIDE

Sizing Chart

HOW TO SIZE FOR MEN'S WORKWEAR

HOW TO SIZE FOR WOMEN'S WORKWEAR

Gerard_Enespro_65_Cal_Vented_Lift_Front_Hood_LOW_RES.png
Gerard_Enespro_65_Cal_Vented_Lift_Front_Hood_OPEN_LOW_RES.png
1/5
Gerard_Enespro_65_Cal_Vented_Lift_Front_Hood_LOW_RES.png
Gerard_Enespro_65_Cal_Vented_Lift_Front_Hood_OPEN_LOW_RES.png

Enespro® 65 cal Lift Front Hood with Vents

COLORS

PRODUCT NUMBER: EN653HKVKH02AL

SIZES

COMPLIANCE

NFPA 70E CSA Z462 OSHA 1910.269 ASTM F2178
ARC RATING: 65 cal/cm²
CAT LEVEL: CAT 4
MATERIAL: 14 oz. Fabric system with a Kevlar® blend facecloth and multilayer quilted Aramid® liner

FEATURES

Made in the USA
  • PureView™ faceshield technology features a greater range of visibility
  • Premium anti-fog & scratch resistant coating on faceshield
  • Inherently flame resistant for FR protection that will not wash out
  • 2 large “Arc Vents” on Hood dramatically increase air-flow
  • Hard hat included

COMPLIANCE

  • Compliant to NFPA 70E for Arc Flash
  • Compliant to CSA Z462 for Arc Flash (Canada)
  • Complies with OSHA 1910.269
  • Compliant to ASTM F2178 for Arc Flash

PRODUCT CARE

  • Remove faceshield and hard hat prior to washing.
  • Faceshield: DO NOT use ammonia based cleaners. DO NOT use any abrasives or polishes. NEVER use if cracked or broken.
  • Wash with warm soapy water. Mild soap only. Rinse thoroughly. Pat dry with a soft cloth.
  • Always transport and store your faceshield, goggles, and glasses in a soft cloth bag to minimize wear & tear.
  • Shroud: Machine wash warm (MAX. 140 *F/60 *C). Use mild detergent. Tumble dry on medium setting.
  • DO NOT iron. DO NOT USE chlorine bleach. DO NOT USE hydrogen peroxide. DO NOT USE fabric softener. DO NOT USE starch.
  • Wash according to the instructions above to remove any contaminants in order to maintain fabric performance when garment becomes soiled with dirt, greases, oils, etc.
  • If contaminants cannot be removed after laundering, it is best to discontinue use of garment.